Innovative measuring tools, PAT applied
including universal housings for calipers and accessories in reinforced plastic,
(removable semi-permanent and permanent fitting) on to the caliper jaws.
Also precision machined version.
Including enclosed DRO Quill kit with safety stops.
Including 0-1000 mm measuring frame.
This includes all the necessary “tooling”for their production, plastic injection molds, dies, fixtures assembly jigs, gauges and a vacuum form machine especially designed for fast, small to medium order packaging.
Universal housings No.40-40
Are the means for attaching a very wide variety of accessories on to the jaws of commercially available calipers ( vernier,dial or electronic digital ) recommended is a e.digital caliper due to its higher accuracy and the "zero set" at any position feature!
Features:
-
Thumbscrew lock on the contact point rods No.20-4 at any position on its length.
-
Reinforced plastic with three thumb knobs for secure fitting on to the caliper jaws. No allen keys required! No screw marks on the caliper jaws.
-
Both vertical and horizontal (to the beam) access holes for the accessories.
-
Manual and removable,or permanently bonded on to the caliper jaws with no further adjustments or alignment necessary.
-
The various accessories can be supplied in the standard kits or "your choice" accessories to suit your needs.
Universal housings No.40-40
Are the means for attaching a very wide variety of accessories on to the jaws of commercially available calipers ( vernier,dial or electronic digital ) recommended is a e.digital caliper due to its higher accuracy and the "zero set" at any position feature!
Features:
-
Thumbscrew lock on the contact point rods No.20-4 at any position on its length.
-
Reinforced plastic with three thumb knobs for secure fitting on to the caliper jaws. No allen keys required! No screw marks on the caliper jaws.
-
Both vertical and horizontal (to the beam) access holes for the accessories.
-
Manual and removable,or permanently bonded on to the caliper jaws with no further adjustments or alignment necessary.
-
The various accessories can be supplied in the standard kits or "your choice" accessories to suit your needs.
Accessories
No. 20-1719
​
Reversible threaded joggled contact point rods for measurments below the bottom of the universal housings.
No. 20-23
​
Accessory for small inside dimensions.
No. 20-24
​
Accessory for inside measurments lower than the universal housings and free access both sides.
No. 20-25
​
Accessory for outside measurments lower than the universal housings and free access from both sides.
No. 20-43
​
Similar to 20-4 but fitted with ball contact points.
No. 20-29
​
Capacity extenders will increase the application range of your caliper by 225mm (8.6 inches) plus a further 40mm (1.6 inches) if fitted with 20mm extensions No. 20-44 at setting No.2.
There are 5 setting positions on the capacity extenders profile that conveniently accept the most suitable probe for the application.
Measuring slot and wall thicknesses
See accessories 20-24, 20-25 (without both sides access)
Precision machined housings as alternative to the plastic housings.
Joggled contact point rods reversed for inside measurments.
Accessory reversed suitable for concealed wall thickness etc.
No. 20-2122
​
Reversible accessory fitted outwards and suitable for measuring concealed inside dimensions.
DRO quill kit enclosed against dirt and coolants
(double "Z" control with digital and safety stops)
-
The fully enclosed digital scale unit kit (No. 50-10) suitable for D.I.Y assembly on bridgeport type milling machines.
-
Supplied with or without the cover (No. 50-50)to guard the digital scale unit against grime and coolants.
-
Double "Z" Control attached to the milling m/c head and mobile spindle stop will allow maximum control of the spindle movement.
-
supplied complete with all the components and fittings adjustable to suit the varied dimensions of the different machines,with instructions and diagrams for easy self assembly.
-
The Double "Z" control assembly mounted "off center" on the milling m/c. head will allow free access to the "stop nut" assembly, and the option of adding the "safety stops".
-
The Double "Z" control assembly also allows easy access to the milling m/c head locking nuts with no interference when tilting the head.
-
Safety stop kit (No. 50-60- optional)for additional safety during repetitive operations! The use of which also eliminates the need to continuously adjust the stop nuts up and down the central screw.
Measuring frames up to 1000mm (with the possibility to extend)
Must be set to a known/calibrated master to ensure accuracy (see calibrations stand no. 60-41)
​
Single beam No. 60-1
Features
-
Lightweight stainless steel-plastic construction application range 0-1000mm plus to order.
-
Measurement span as per fitted digital linear scale, digital or analog clock.
-
Double "side play" elimination device.
-
2 axis alignment regulation device.
-
Optional calibration stand No.60-41 for inside micrometer (sold separately) or length gauge (not included) with floating gauge alignment device.
-
Permanently bonded universal housings.
-
Optional depth stops.
-
When fitted with a digital linear scale and the universal housings any of the shown accessories can readily be attached.
-
Model No 60-1 main beam to probe depth 90mm (3.5 inches).
-
Digital scale beam to probe depth 70mm (2.7 inches).
Caliper stands
Suitable for "wall mounting" or "tabletop" to stack up to 5 "ready set for immediate use" calipers.
Without accessory drawer code.no 30-10.
With Accessory drawer code.no 30-20.